Do you know the Glass bottle making progress ?

1- Glass bottle manufacturers use sand, soda ash, and limestone as the majority of the raw materials used to manufacture glass bottles.

2. The raw materials and broken glass are continuously melted at high temperatures, at around 1650 ° C, and the furnace operates 24 hours a day. The mixture of raw materials forms molten glass for about 24 hours.

In blow molding, the material droplets are compressed into the blank mold, and compressed air is used to push the material droplets into place, called the blank. They are moved into the final mold and blown again to form the inner side of the frame glass bottle. Glass bottles with different neck thicknesses can be manufactured using blowing arrangements

4. In order to make the bottles and jars more scratch resistant, this is called hot end surface treatment, and then the glass bottles are taken to the annealing furnace where their temperature is restored to approximately 815 ° C, and then gradually reduced to below 480 ° C. This will take approximately 2 hours. This reheating and slow cooling eliminates the pressure in the container

5. After leaving the cold treatment end of the annealing furnace, in order to ensure product quality, we use Led beam technology (Led detection), Camara detection machine, and comprehensive detection machine to detect faults that cannot be seen by the naked eye. These include, but are not limited to: sealing surface inspection, dimensional analysis, wall thickness inspection, damage detection, edge and bottom scanning, and wall scanning. Any bottles that do not meet the standards will be automatically removed, and these removed bottles will be remelted and reused as raw materials.

6.Glass packing , usually pallets packing directly and carton with pallets .

Econle glass bottle production line.